Scuffham-Amps-S-Gear2-v2.6.0-R2R-Stand-DAW-Rewire -- WIN'ED by SQUAD for MAC OSX

It's a wine workaround of the R2R Win-version fully usable on Macs systems and DAWS S-Gear2 run in a custom version of wineskin , iʼve included Wineasio and Jack osX Thanks To BadnFunky , itʼs him who advised me about the benefits of wineasio ... and Jack osx Wineasio and Jack working together and r

资源介绍

SQU4D | Oct 31 2017 | 522 MB

It's a wine workaround of the R2R Win-version fully usable on Macs systems and DAWS

S-Gear2 run in a custom version of wineskin , iʼve included Wineasio and Jack osX

Thanks To BadnFunky , itʼs him who advised me about the benefits of wineasio ... and Jack osx

Wineasio and Jack working together and reduce drastically the latency to make it usable 5,8ms in/out for me ...but try less if you want just reduce the jackpilot buffer size ;-)

The size of the app is bigger than the original because of wine frameworks and win libs...

BEFORE ALL

NOTHING COMPLICATED , WATCH THE 4 VIDEOS to understand and copy settings etc ....

Set your Mac audio system preferences as usual with a classic ampli-sim standalone ,

iʼve recoreded guitar with the built-in input of my MacBookPro but if you using a sound card it works too :-) ... some cards will probably not working i havenʼt and canʼt test them all

a big thanks to R2R TEAM !!!

sorry for the sound of the videos , i've recorded it with an iPhone ,

i made video-cap with quicktimeX and had some trouble to recording sound

because quicktimeX don't see jack in its sound input ...

INSTALL unzip with keka

1- Install JACK OSX (included in zip)

2 - Restart your Mac

3- Launch and start JackPilot in your Applications in "Jack" folder

4- Reg wineasio (watch Reg-wineasio texts & videos)

to reg wineasio , jackpilot have to be launched and started

5- Set jackpilot prefs & audio interface(s) and save (watch reduce latency video)

6- Launch SGear-2 ....and now anytime you want run S-gear2, it's like a classic app,

just run jackpilot before ... no need to re-set Jack & Sgear2 preferences.

DAW REWIRE : really simple

-Run qjackctl (in Jack folder) and press start ....

-Launch your DAW and set to your DAW input jackouter (then create a track and set input-1)

-Then back to qjackctl , go to Connect and link S-gear to your DAW

-Then disconnect pins of the system DI in your DAW to have just the S-Gear sound recorded

for full instructions & DAW-REWIRE check the readme and videos included

Spoiler:

pass zip is : 4UDI0Z

相关推荐